Cooper Halo Commercial 6 in. 13W DTT CFL Horizontal Housing

Recessed 6 inch aperture lens downlight for one horizontal 13W or
18W double twin tube compact fluorescent lamp. Fixture is suitable
for commercial construction and wet location listed. Insulation must
be kept 3" from top and sides of housing. Universal input electronic
ballast with dimming and emergency options.

Mechanical
Frame
Boat shaped galvanized steel
frame with 1/2" plaster lip
accommodates ceilings up to
2" thick. May be used for new
construction or remodeling
installations. Provided with (2)
remodel clips to secure frame
when installed from below the
ceiling.

Mounting Brackets
Bar hanger receivers adjusts 2"
vertically from above the ceiling
or thru the aperture. Use with
No Fuss™ bar hangers or with
1/2" EMT. Removable to facilitate
installation from below the
ceiling.

No Fuss™ Bar Hangers
Pre-installed and centered bar
hanger locks to tee grid with a
screwdriver or pliers. Centering
marks on the bar hanger
mechanism allows consistent
positioning of fixtures.

Optical
Reflector
One piece aluminum reflector
secures lens in place with
integrated spring clips for a
visually comfortable optic and
allows for tool-less lens exchange
from below the ceiling. Available
with clear, diffuse, prismatic,
fresnel, or drop opal glass lens.
Optional cross blade louver
provides sharper cutoff to lamp.
Self flanged standard.
- Specular Reflectors - Polished
flange standard with white
painted flange option.
- Baffles and White Reflector -
White painted flange
standard.

Trim Retention
Reflector is retained with two
torsion springs and held tightly to
the finished ceiling surface.
Electrical

Junction Box
(6) 1/2" and (2) 3/4" trade size pry
outs positioned to allow straight
conduit runs. Listed for (12)
#12 AWG (six in, six out) 90°C
conductors and feed thru branch
wiring.

Lamp Socket
4-pin G24q base accepts (1) 13W
or 18W DTT lamp.

Socket Housing
Galvanized steel socket housing
attached securely to reflector
with captive thumbscrew. Vents
provide effective lamp thermal
management.

Control Gear
Universal 120V - 277V UNV or
347V input electronic ballast for
13W or 18W compact fluorescent
lamp.

Emergency Battery Pack
REM – Remote emergency
test switch. Housing includes
120V/277V, 60Hz dual-tap battery
pack provides 90 minutes of
emergency illumination. Long life
maintenance free sealed nickel
cadmium batteries recharge fully
in 24 hours. REM configuration
includes prewired and attached
remote test switch plate and
indicator light. REM option
is the standard emergency
configuration, and is compatible
with all standard reflector
options, ordered separately.
IEM – Integral emergency
test switch. Housing includes
120V/277V, 60Hz dual-tap battery
pack provides 90 minutes of
emergency illumination. Long life
maintenance free sealed nickel
cadmium batteries recharge fully
in 24 hours. IEM configuration
includes a prewired integral
emergency test switch and
indicator light that are both
accessible inside the reflector.
The IEM option requires “EM”
designated reflectors only,
ordered separately.
Emergency Battery Pack - Average
Lamp Lumen Ratings
REM option: 13W 350lm, 18W
350lm
IEM option: 13W 570lm, 18W
680lm
(Note: average lamp lumens
are based upon REM and IEM
manufacturer ratings. Delivered
lumens depend upon trim; refer
to trim photometry to factor
delivered lumens).

Code Compliance
- Thermally protected and cULus
listed for wet locations.
- IP44 rated for lens trims.
- NFPA Life Safety (Emergency

Battery Pack).
- EMI/RFI per FCC Title 47 CFR,
Part 18, non consumer limits.
- High efficacy luminaire may
be used to meet IECC, ASHRAE,
and Title 24 commercial
standards.

All trim types are available including baffle, alzac, wall wash, adjustable "eyeball", wet location and airtight rated trims. Call 1-800-480-0707 or email sales@canlights.net to choose popular trim colors including bronze, metallic, white, black or custom color options.